Weldmark by Victor Series Purox 4202 Copper Cutting Tip for Acetylene with a Preheating flame type. The Cutting Tip has a One Piece design and has a maximum cutting capicity of 1 in. Size: 5
The Weldmark® by Victor® Acetylene Purox 4202 series Oxy-Fuel Size 5 Cutting Tip has a 1.5 inch cutting capacity. This general purpose Purox 4202 series tip is 0.8" long and 3.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 16-20 or 11-13 inches per minute with an average kerf width of 0.070-0.090". It's designed for use with Acetylene. The max Acetylene pressure is 7 and the max oxygen cutting pressure is 55. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.