Weldmark® by Victor® Acetylene 1-101 series Oxy-Fuel Size 2 Cutting Tip has a 1" cutting capacity with an average kerf width of 0.09". 1-101 series tip is 0.8" long and 1.2" wide. For hand and machine torch cutting. Compatible with CA2460/61/62 and CA411-1 cutting attachments. One piece.
The Weldmark® by Victor® 1-101 series Oxy-Fuel Size 2 Cutting Tip has a 1 inch cutting capacity. This general purpose 1-101 series tip is 0.8" long and 1.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 15-19 inches per minute with an average kerf width of 0.09". It's designed for use with Acetylene, with a max Acetylene pressure of 6 and a max oxygen cutting pressure of 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.