Weldmark by Victor Series 1-101 Copper Cutting Tip for Acetylene with a Preheating flame type. The Cutting Tip has a One Piece design and has a maximum cutting capicity of 3 in. Size: 0
The Weldmark® by Victor® Acetylene 1-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 3/8-½ inches. This general purpose type 1 series tip is 0.8" long and 1.2" wide and comes in one piece. It is ideal for hand or machine cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 20-24 or 24-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 6, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.