Weldmark by Victor Series 3-GPN Copper/Brass Cutting Tip for Oxygen/Natural Gas or Propane. Two Piece with Spline Insert design and has a maximum cutting capacity of 1/2 in. Size: 0

Marketing Descriptions

The Weldmark® by Victor® Oxygen/Propane or Natural Gas 3-GPN series Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 1/2 inch. This general purpose 3-GPN series tip is two piece with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 18-24 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with Propane or Natural Gas, with a max gas pressure of 5 psig, and a max oxygen cutting pressure of 35 psig. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.