Active
Weldmark by Tweco WMK3550
Weldmark by Tweco 35-50 Series for 150Amp MIG Gun Standard Duty
Manufacturer
IWDC
Brand
Weldmark by Tweco
MFR Part No
WMK3550
Part Number
WEM WMK35-50
UPC
608246387369
Descriptions
Weldmark by Tweco 35-50 Series brass, 160 amp, threaded Standard Duty Gas Diffuser.
Marketing Descriptions
Weldmark® by Tweco® WMK35-50 Standard Duty Brass Gas Diffuser is perfect for use with thread-on nozzle assemblies with 160 A Tweco® Mini-MIG-Gun® series. Gas diffuser has magnificent electrical properties making it ideal for use in light to medium duty standard welding application up to 160 A. 1.714" Gas diffuser with M9 x 1.25-M6 thread size has four 0.094" gas holes. It features part number rolled stamped on the external surface and overall length for easy identification. Gas diffuser is made from 360-brass alloy bar stock offers consistent dimensional stability. Gas diffuser features a conduit set screw that can accommodate the conduit liner in place. It has a proper threaded conductor tube to use with MIG guns. Gas diffuser is sold as 5 per pack.
Specifications
Amperage Rating ~ Max
160
Contact Tip Series
11 Series|WS11|WMK11
Cooling Method Platform
Air
Freight Class
70
Item Length
1.71400000
Item Length Metric
43.5400
Item Length US
1.7140
Member Supplier Source
IWDC Distribution Centers
Mfg OEM Part Number Xref
15001100
MIG Diffuser Application Type
Standard Duty
MIG Diffuser Material
Brass
MIG Diffuser Series
35-50 Series
MIG Gun Series
Mini-MIG
MIG Nozzle Connection Type
Threaded
MIG Nozzle Series
WMK21
Process
MIG (GMAW)
Standard Pack Units
5.0
Standard Pack UOM
BG
Standard UOM
EA
Weight
0.0000
Work Duty Rating
Standard Duty
Features
Easy identification - part no rolled stamped on the outside surface | A machined thread is on the outside surface to allow the nozzle assemblies to thread over holding the nozzle in place during the welding process | Designed to be used with thread on nozzle assemblies | Machined from 360 brass alloy bar stock to ensure consistent dimensional stability | Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch) | Flush tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece | Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint | However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Additional Info
Package Description
P.O.P. Hanging Plastic Bag
Enriched Indicator
Enhanced
Country of Origin
United States