Active
Weldmark by Metal Man Workgear WEM PC45DV
WEM PC45DV, Dual Voltage, DC Inverter Plasma Cutter.
Manufacturer
IWDC
Brand
Weldmark by Metal Man Workgear
MFR Part No
WEM PC45DV
Part Number
WEM PC45DV
UPC
677677000000
Descriptions
The Weldmark® PC 45DV Plasma Cutter is a dual voltage single phase DC inverter plasma cutter. It has output ranges of 15-23 amps at 120V, and 15-45 amps at 230V. Includes machine with plasma torch and cable assembly, 6 ft power cord, ground cable and clamp, 120v power adapter and extra nozzles and electrodes. Operation requires use of compresses air. Rated for standard duty.
Marketing Descriptions
The Weldmark® PC 45DV Plasma Cutter is a dual voltage single phase DC inverter plasma cutter. It has output ranges of 15-23 amps at 120V, and 15-45 amps at 230V. Includes machine with plasma torch and cable assembly, 6 ft power cord, ground cable and clamp, 120v power adapter and extra nozzles and electrodes. Operation requires use of compresses air. Rated for standard duty.
Specifications
Applicable Materials
Mild steel, galvanized steel, aluminum, copper, brass, all electrically conductive materials
Duty Cycle
120V, 35% @ 23 amps, 230V, 50% @ 45 amps
Features 10
Electrodes, nozzles, diffuser rings and protective caps are consumable items and are available through Weldmark® distributors located throughout North America
Input Power Cable Length Metric
1.83
Input Power Cable Length US
6
Item Height Metric
368.3
Item Height US
14.5
Item Width Metric
255.016
Item Width US
10.04
Member Supplier Source
IWDC Distribution Centers
Net Weight Metric
10.24
Net Weight US
22.58
Plasma Application Type
Cutting|Drag cutting and Gouging with optional consumables
Plasma Equipment Power Supply Type
Inverter
Plasma Gas
Compressed Air
Plasma System Series
Weldmark® PC 45DV
Prop65 Required
Yes
Rated Output Max 120V Amps
23
Rated Output Max 230V Amps
45
Rated Output Min 120V Amps
15
Rated Output Min 230V Amps
15
Standard Pack Units
1
Standard Pack UOM
EA
Standard UOM
EA
Work Duty Rating
Standard Duty
Features
Dual voltage, 50/60 HZ single phase DC inverter plasma cutter
Designed to cut up to 11/16" steel at a travel speed of 10 inches per minute when operating on 230V AC power
Cuts up to 1/4" steel at a travel speed of 10 inches per minute on 120V AC when using the included adapter cord
Cuts a narrow kerf that results in a smaller heat affected zone for reduced warping
Has a pilot arc for easy starts and enables user to cut fence or expanded metal
Has a built-in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal overload protection
Includes a built-in water separator
Digital meters allow for a more precise setting to achieve the optimal setting for a more exact cut
Compressed air required - 4.5 CFM @ 60 psi (do not supply more than 100 psi)
Additional Info
Package Height
15.5
Package Length
21
Package Width
11
Package Weight
27 lbs
Enriched Indicator
Enhanced
Country of Origin
China