Weldmark by Victor Series 3-101 Copper Cutting Tip for Oxygen/Acetylene. The Cutting Tip has a One Piece design and has a maximum cutting capacity of 1/8 in. Size: 000

Marketing Descriptions

The Weldmark® by Victor® Oxygen/Acetylene 3-101 series Oxy-Fuel Size 000 Cutting Tip has a cutting capacity of 0.125 inch. This general purpose 3-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 28-32 inches per minute, with an average kerf width of 0.04 inches. It's designed for use with Acetylene gas, with a max Acetylene pressure of 5 and a max cutting oxygen pressure of 25. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.